More than capable of driving a 4x12 cabinet, the HT METAL 5H is the perfect guitar amp for the studio, home and even live use.
5 watts, 1 x ECC83, 1 x 12BH7
The HT METAL 5H is the ultimate studio and practice metal amp. An innovative 5 Watt, footswitchable 2 channel valve head that uses 1 x ECC83 and 1 x 12BH7 valves.
ISF Control - Everything from scooped US to UK heavy metal
The patented ISF control works with the Bass, Middle and Treble controls to give you access to infinite new sound possibilities from scooped US to classic UK heavy metal tones and everywhere in between. This fully interactive control allows you to infinitely adjust the response of the tone control network between any of the traditional voicings. In this way you can design your own sound and truly find the sound in your head.
Two Footswitchable Channels - Clean to metal
The HT METAL 5H has two channels available for selection. Using the Volume control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted metal lead tone.
Unique push-pull power amp design - Big-amp response, small-amp volume
The HT METAL 5H power amplifier is a low powered push-pull design which produces the crunch and break-up characteristics of a traditional 100W output stage, but at a much lower volume. This is achieved by the use of a 12BH7 dual triode valve in push-pull configuration producing 5 Watts output, rich in valve harmonics and compression, sounding full and toneful even at the lowest volume level.
Stereo MP3 / Line Input - Jam to your favourite track
A stereo MP3/Line Input has been added to the HT METAL 5H allowing the user to play a backing track or similar, through the amp while practising / recording.
External Speaker Output - Hook up to a cabinet
The external speaker output on the HT METAL 5H allows you to connect further extension cabinets. The output marked '1 x 16 Ohm' is for the connection of a single 16 Ohm extension speaker cabinet. The outputs marked '1 x 8 Ohm or 2 x 16 Ohm' are for the connection of either a single 8 Ohm extension cabinet or two 16 Ohm cabinets.
Reverb Control - Add in some reverb
The HT METAL 5H's Reverb control sets the overall level of the reverb effect. Carefully voiced to sound great on both the Clean and Overdrive channel, it's perfect for adding a sense of space and 'size'.
Effects Loop - Connect effects pedals
The effects loop allows you to connect effects pedals or other professional equipment using the return and send connections. The Effects Loop Level switch sets the effects loop to either +4dBV/-10dBV, which enables you to use it with either professional equipment (+4dBV setting), or with guitar level effects such as effects pedals (-10dBV setting).
- Innovative 5 Watt valve head
- Specially voiced for metal guitar
- Extreme gain and tone
- 1 x ECC83 and 1 x 12BH7 valves
- Unique push-pull power amp design
- Two footswitchable channels
- Enhanced tone controls
- Patented Infinite Shape Feature (ISF)
- Fully equipped for studio or practice
- Digital stereo reverb
- Speaker emulated output with 1x12 and 4x12 voicings
- Effects loop with effects level switch